Supports USB 2.0 full speed (12 Mbps) and USB 1.1 low speed (1.Wide ambient temperature operation, -40 to 70☌ (-40 to 158☏).This board features the MAX14937, a two-channel, 5kVRMS I2C digital isolator from Analog Devices.The MAX14937 provides two bidirectional, open-drain channels for applications that require data to be transmitted in both directions on the same line. Compact size and rugged design for harsh environments I2C Isolator 4 Click is a compact add-on board that offers completely isolated bidirectional communication.Uses standard high-retention USB Type A/B cable connections (includes 1m cable).No software or configuration required (transparent operation).Output short circuit protection with auto-retry.Reset button to reinitialize and re-enumerate peripheral devices.LED for power indication and diagnostics.Supports USB 2.0 full speed (12 Mbps) and USB 1.1 low speed (1.5 Mbps) data rates with jumper-selection.With one input and four outputs, the D-Split gives you the ultimate flexibility to link up to 32 DMX fixtures. Built-in surge/transient suppression up to 8kV on all ports About: ENTTEC D-Split DMX Optical Isolator/Splitter (5 Pin) The D-Split is an optically-isolated DMX splitter and repeater for DMX512.Common mode filtering on all data lines.Electrical isolation up to 1500V AC / 2100V DC.Isolates and protects a USB peripheral from a USB host.High-retention USB sockets keep cables securely attached under shock and vibration. The reset button offers a simple way to reinitialize a connected device without breaking the cable connection. An internal jumper lets you switch from Full Speed (12 Mbps) to Low Speed (1.5 Mbps) communication. The green LED indicates that power is being received and blinks if the connected device draws too much current. High noise immunity and low radiated emissions ensure reliable data transfer in sensitive applications.Ī number of high-performance features help provide convenient and dependable operation. DMX 512 optically isolated through connector designed to protect a DMX lighting board or any DMX generating device from (high voltage) dimmers, fixtures, or. The unit receives power from the PC’s USB port and isolates that power to the connected device. No special software drivers are required. The isolator inserts in-line with the USB connection and operates transparently. Additionally, isolation minimizes conducted noise from static discharge, magnetic fields, and radio frequency interference.Īcromag’s USB isolator is very easy to use. It also eliminates ground loop currents flowing between the PC and peripherals which can cause damage and inaccurate measurements. The isolation protects equipment from electrical surges and transient voltage spikes. This compact, industrial-grade isolator provides a high-voltage isolation barrier between a computer and a connected USB device.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |